| Symptom | Possible Cause | Solution | |---------|----------------|----------| | No read, LED not blinking | Power supply issue or poor grounding | Check 5V regulator; ensure GND is common with host | | Intermittent reads | Antenna mismatch or detuning | Re-tune antenna to 125 kHz; adjust coil inductance | | Wrong card number reported | Wiegand timing mismatch | Increase inter-bit timeout to 5ms; check for signal reflections | | Module reads but lags | Old firmware version | Verify you have REV B or later; flash updated firmware from Alps | | Reads only some HID cards | Frequency drift or unsupported format | Ensure cards are Prox (not iClass or Seos); test with 26-bit default |
: If your touchpad is currently working without issues, experts suggest ignoring this update. It is classified as "Optional," and its core improvements are typically rolled into later cumulative Windows updates.
Alps Electric, a renowned Japanese electronics company, has been a leading manufacturer of various electronic components, including human interface devices. One of their notable products is the HIDClass 10013, a highly sought-after device that has recently received an update. In this blog post, we'll dive into the details of the Alps Electric HIDClass 10013 updated version, its features, and what it means for users. alps electric hidclass 10013 updated
Settings > Update & Security > Windows Update > View optional updates
If the update fails to install or keeps reappearing, you can: | Symptom | Possible Cause | Solution |
If you are deploying these updated units, follow this modern guide.
If you are holding a unit and want to verify it is the updated revision, look for: One of their notable products is the HIDClass
While the main touchpad usually uses a Synaptics or standard Microsoft driver, the "stick" often requires this specific Alps driver to function correctly, allowing for features like pressure sensitivity, tap-to-click, and scroll emulation.
Right-click on (or the device showing the error) and select Properties . Navigate to the Driver tab. Click Roll Back Driver . Select a reason, click Yes , and restart your computer. 2. Uninstall and Reinstall via Windows Update