Press again to set the start minute, followed by the end time hour and minute. 5. Troubleshooting and FAQ Why does my clock display turn off?
An (usually a small bell or dot) will appear on the screen when the alarm is active. Handling a Ringing Alarm
To set up your , use the five main buttons: MODE , ALARM , SNZ/LIGHT , UP , and DOWN . 1. Setting the Time Hold MODE for 3 seconds until the display flashes.
Decreases numbers in settings; toggles temperature between Celsius and Fahrenheit. 3. How to Set the Time Follow these steps to program the correct time: dt6507 led mirror clock instructions
Press and hold the button for 3 seconds until the year digits flash. Press UP or DOWN to select the current year. Press MODE once. The month digits will begin flashing. Press UP or DOWN to set the month. Press MODE once. The day digits will begin flashing. Press UP or DOWN to set the day. Press MODE to save and return to the main menu. 5. How to Set the Alarm and Snooze Programming the Alarm Time
Switches between Time, Date, Temperature, and Night Mode.
: This is usually a loose ribbon cable inside. Gently press the back of the mirror near the display area. If that works temporarily, the mirror needs internal re-seating of the LCD/LED connector. Press again to set the start minute, followed
When the clock is running on battery power alone, the display turns off completely after about 6-16 seconds. Pressing any button brings it back, but it turns off again after the same interval.
Night Mode automatically lowers the screen brightness during specific evening hours to prevent glare while you sleep.
Insert 3x AAA batteries (not included). Note that the display will typically turn off after a few seconds to save power when using only batteries. 2. Setting the Time (12/24 Hour) An (usually a small bell or dot) will
Setting a wake-up call on your DT6507 clock is easy, and the snooze function gives you a few extra minutes of rest.
Located on the lower right or lower center of the mirror. It has no moving parts. You will see 3–5 backlit icons when the mirror is on:
Press and hold the button for 3 seconds until the year digits flash. Press UP or DOWN to set the current year. Press MODE to confirm. The month digits will flash. Press UP or DOWN to set the current month. Press MODE to confirm. The day digits will flash. Press UP or DOWN to set the current day. Press MODE to save and exit. ⏰ Step 3: Setting and Activating the Alarm
| Button Label | Primary Function | Long Press (Hold) Function | | :--- | :--- | :--- | | | Navigate through display modes (Clock > Date > Temperature) | Enter settings mode for the currently displayed item (Time, Date, etc.) | | ALARM | Turns the alarm ON or OFF; shows the current alarm time | Enter the alarm time setting mode | | SNZ/LIGHT | Activates the snooze function when the alarm is sounding | Adjusts the display's brightness level between two settings | | UP (▲) | Navigate forward or increase a value in settings mode | N/A | | DOWN (▼) | Navigate backward or decrease a value in settings mode; toggle between °C and °F | N/A |
