Polarity does not matter; it only requires a momentary contact.
20-pin internal connector for front-chassis USB 3.0 ports. ipmmb-fm motherboard manual
desktop systems. Because it is a proprietary OEM part, a traditional "retail" manual does not exist Key Specifications Overview CPU Support: Polarity does not matter; it only requires a
1 x PCIe x16 (Gen 3.0), 3 x PCIe x1 (Gen 2.0), 1 x PCIe Mini Card 2 x SATA III (6.0 Gb/s), 4 x SATA II (3.0 Gb/s) Power Connectors 1 x 24-pin ATX Main, 1 x 4-pin ATX 12V 2. CPU Support and Socket Compatibility Because it is a proprietary OEM part, a
Top Row: [ Pin 2: PLED + ] [ Pin 4: PLED - ] [ Pin 6: PWR SW ] [ Pin 8: PWR SW ] [ Pin 10: Empty ] Bottom Row: [ Pin 1: HDLED+ ] [ Pin 3: HDLED- ] [ Pin 5: RESET ] [ Pin 7: RESET ] [ Pin 9: Key/NC ]
| Feature | Specification | | :--- | :--- | | | Micro-ATX (24.4 cm x 24.4 cm) | | CPU Socket | AMD FM2 (Supports Trinity/Richland APUs) | | Chipset | AMD A75 FCH (Hudson-D3) | | RAM Slots | 2 x DDR3 DIMM (Max 16GB, 1600MHz, non-ECC) | | Expansion Slots | 1 x PCIe x16, 1 x PCIe x1, 1 x PCI | | Storage | 4 x SATA 3Gb/s, 1 x eSATA (rear) | | Rear I/O | PS/2, VGA, HDMI, 4x USB 2.0, 2x USB 3.0, RJ-45, Audio jacks |
If you are locked out of the BIOS or the system fails to POST after a hardware change: Locate the CLR_CMOS jumper (usually near the battery). Move the jumper from pins 1-2 to pins 2-3 for 10 seconds.