Complete the installation wizard prompts and restart your computer to apply the changes. Step 3: Configure the Flashing Software
1.8-inch (4.57 cm) screen with 128 x 160 pixel resolution. Battery: 1000 mAh Li-ion removable battery.
Download and organize these files in a single folder on your desktop: karbonn k140 pop flash file
The tool will show a progress bar. Once finished, a "Passed" or green ring notification will appear.
: Install the Karbonn USB Driver on your PC to ensure the device is recognized. Complete the installation wizard prompts and restart your
Open the extracted Upgrade Tool folder and run UpgradeDownload.exe as an administrator. Connect your Karbonn K140 Pop
Browse into your extracted Stock ROM folder, select the system map file (e.g., MTxxxx_Android_scatter.txt ), and hit open. Download and organize these files in a single
Locate the firmware folder and select the .pac file (e.g., K140_Pop_Firmware.pac ). 4. Initiate the Process Click on the button (play icon button). 5. Connect the Phone Turn off your Karbonn K140 Pop.
If the tool does not react when you plug in the phone, reinstall the SPD USB drivers. Try switching to a different USB port or using a different cable.
The following steps outline the general process for flashing Karbonn firmware using the SP Flash Tool : : Download and unzip the K140 Pop Flash File and the flash tool on your computer.
Complete Guide to Karbonn K140 Pop Flash File: Firmware Download and Installation Karbonn K140 Pop Go to product viewer dialog for this item.