Kincaid Radio Controlled Clock Instruction Manual [extra Quality] Today

Press again to confirm and move to the next value (Hour, Minute, Year, Month, Date). Press SET one final time to save your settings. Advanced Button Functions

The LCD screen will light up, display all segments briefly, and then default to a baseline time (usually 12:00 AM) and date.

Once the battery is installed and the hands are set roughly to the correct time, your Kincaid clock will begin searching for the WWVB signal. kincaid radio controlled clock instruction manual

Press and release immediately to advance the time by one minute.

Upon inserting the battery, the second, minute, and hour hands will automatically rotate and stop at either the 4:00, 8:00, or 12:00 position. This is normal behavior; the clock is aligning its internal mechanisms. Press again to confirm and move to the

A: Up to 24 hours. Many clocks sync within 2 hours, but some take a full day to find a clear signal. Do not return the clock as defective until 3 full nights have passed.

Most setup issues stem from skipping this specific sequence. Do not deviate from these steps. Once the battery is installed and the hands

If you are outside the standard signal range or the signal is weak, you may need to set the time manually: Enter Manual Mode : Press and hold the ) button on the back for approximately 3 seconds. Adjust Time Press and hold the button to fast-forward the hands.