Netcut Termux ((better)) -

Always be cautious when downloading network-hacking scripts from unknown GitHub repositories, as they may contain malicious code that compromises your own device.

cd jni gcc -I./include -lnet -lpcap *.c -o arpspoof

This command outputs the IP addresses, MAC addresses, and device manufacturers of everything connected to your Wi-Fi. 2. Simulating the "Cut" Functionality (Arpspoof) Netcut Termux

This command sends forged ARP replies to both the target and the gateway, tricking them into routing traffic through your device. If IP forwarding is not enabled, the target loses connection .

Before you can cut off a device, you'll need to identify its IP address and MAC address. You can scan your network with: You can scan your network with: Once Termux

Once Termux is ready, update its repositories and install core dependencies:

: If you are using a specific Python-based Netcut clone from GitHub, run it with: python netcut.py Why use it? Netcut Termux

sysctl -w net.ipv4.ip_forward=1

nmap -sn 192.168.1.0/24 arp -a