The Strands S68 is a heavy-duty floor-standing drill press designed for precision drilling in wood, metal, and plastic. Known for its robust cast-iron construction and variable speed system, it is suitable for both professional workshops and serious hobbyists.
Ensure your shop circuit includes correct thermal overload protection matched to the motor nameplate amperage. 3. Machine Controls and Operation
Bump the motor starter briefly to verify correct spindle rotation (clockwise when looking down at the workpiece). If it rotates backward, swap any two incoming power leads (interchanged by a qualified electrician). Operating Instructions Gear Selection and Speed Adjustment
The 8-speed gearbox is operated via levers on the head. The manual provides a chart indicating the correct lever positions for specific RPMs. Strands S68 Drill Press Manual
A: No. The return spring housing should be nearly silent. Remove the spring housing (three screws). Clean out old grease. Apply fresh lithium grease. Reinstall with correct preload – the manual specifies 1.5 turns of pre-wind.
It contains exploded-view diagrams of the machine, a complete spare parts list (with numbered parts for ordering), operational instructions for changing speeds and using the spindle, and a lubrication and maintenance schedule.
Never shift gears while the spindle is rotating. The Strands S68 is a heavy-duty floor-standing drill
Move the levers according to the speed chart printed on the gearbox plate.
Regular maintenance is crucial to extend the lifespan of your Strands S68 drill press. Refer to the manual for:
Clean the internal MT3 spindle bore with a taper wiper; reduce RPM and increase feed pressure. Missing electrical phase. 380V or 400V
The Strands S68 is equipped with a high-torque, 2-speed industrial motor:
The Strands S68 is a high-precision, Swedish-made geared head drill press known for its durability and versatility in both drilling and light milling tasks. Manufactured by (formerly Strands Mek. Verkstads AB), this model is often found in industrial workshops and toolrooms. 1. Technical Specifications
Strands S68 is a high-precision, Swedish-made geared-head drill press known for its robust construction and versatility in both drilling and light milling tasks. While specific digital manuals for this legacy model can be rare, you can find original printable technical sheets and pricing details through equipment specialists like Newmac Equipment . Technical Specifications is a 3-phase machine designed for heavy-duty metalwork. Maximum drill size of 20mm in mild steel.
| Specification | Value | | :--- | :--- | | | Strands S68 / S68L | | Type | Pedestal / Floor Type Drill Press | | Spindle Taper | Morse Taper #3 (MK3) | | Spindle Speed | Variable from 100 to 3600 RPM | | Motor Power | 0.75 kW / 0.9 kW (approx. 1 - 1.2 HP) | | Electrical Supply | 3-phase, 380V or 400V, 16 Amps | | Drilling Capacity | Up to 20mm in mild steel | | Table Dimensions | 500mm x 350mm | | Weight | Approx. 200-218 kg | | Overall Dimensions (L x W x H) | Various: ~500mm x 650mm x 1700-1900mm |