Software - Weierwei Vev3288s Programming

Before any firmware update or major reprogramming, use the software’s “Save to File” function (usually .dat or .img extension) to back up your working configuration.

The VEV-3288S software is typically provided by the manufacturer or reputable radio enthusiast archives. Because this radio shares internal architecture with several other models, you might find the software labeled under "VEV-3288S VIP." 2. Connecting the Hardware Plug the USB cable into your computer.

Navigate to the menu or Communication menu to select the correct COM port (check Device Manager if unknown). weierwei vev3288s programming software

To connect your VEV-3288S to your PC, you will need a . This is a standard two-pin connector.

CHIRP is a widely popular, free, open-source tool used for programming amateur radios. If you cannot find the factory Weierwei software, or if you prefer a modern interface that supports cross-platform operation (macOS, Linux, Windows), check for VEV-3288S compatibility within CHIRP. Because Weierwei shares internal mainboard architectures with several TYT, Linton, and Puxing models, CHIRP often supports it natively or via a sibling model selection. Step-by-Step Programming Guide Before any firmware update or major reprogramming, use

Type your required frequencies directly into the channel spreadsheet. Column Field Target Input Example The frequency you listen to TX Frequency The frequency you broadcast on (adjusted for repeaters) CTC/DCS Decode Filters out background static or unwanted users Power High / Low Maximizes range (High) or preserves battery (Low) 5. Write the New Layout to the Transceiver

Give you a on the VEV-3288S.

Windows requires a driver to recognize the programming cable.

Plug the cable into your PC and then into the radio's Mic/Speaker jack. Turn the radio on and rotate the volume knob to about 50%. Connecting the Hardware Plug the USB cable into

: Install the VEV-3288S software (often distributed as "VEV-3288S Setup") on a Windows-based PC.